Product Information
Suit all Hemi 6 engines, suit factory exhaust manifold or Pacemaker extractors.

Unlike other competitors, we won't give you a fancy name, just the best exhaust gasket on the market.
Using this gasket you can be SURE it will SEAL every time!

Don’t bother with composite gaskets that simply don’t seal!
These gaskets have optimum "crush" value ensuring a tight seal especially good for extractors, but still able to be used on standard factory manifolds with same results!!

The material for outlet manifolds is a perforated stainless steel insert sandwiched between two layers of flexible graphite to ensure that they have a super high heat tolerance like no other aftermarket gasket.

These ones Can be opened up with die grinder for ported heads still have enough material to seal properly making them great for turbo / Supercharged applications....try them, you won’t go back to using inferior ones!

Technical Specification (value relate to 1.5mm thickness)
Non-asbestos laminated jointing roll, composed of beater addition paper inserted with perforated 0.20 - 0.22 mm thick carbon steel sheet. The beater add layers are composed of mineral fibres and fillers, bonded with elastomer.
Max operating temperature 450°C	Compressibility: 17.8%	Recovery: min 59.6%.
Immersion Tests
Type	Compressibility	Recovery	Weight increment	Thickness Increment
in VS 30	17.9%	min 48.1%	max 17.8%	max 6.1%
in ASTM 3 OIL	19.1%	min 48.3%	max 19.5%	max 5.2%
in M 15	20.7%	min 36.5%	max 21.6%	max 11.9%
in FUEL	17.1%	min 46.0%	max 15.9%	max 3.6%
in COOLANT	22.9%	min 44.9%	max 24.9%	max 8.5%

This product is sold as a single unit.