Home

Cart:

0 item(s) - AU$0.00
You have no items in your shopping cart.

0

Filters

You have selected

  1. Category Front Axle & Suspension Remove This Item

Narrow your results

Category
  1. Anti-Sway Bar
  2. Ball Joint
  3. Bearing & Seal
  4. Control Arm
  5. Fastener (Nuts, Bolts, Screws, Studs & Clip)
  6. K-Frame
  7. Strut Rod
  8. Stub Axle
  9. Suspension & Steering Rebuild Kits
  10. Suspension Rebuild Kits
  11. Torsion Bar Boot & Clip
  12. Torsion Bar
Price
  1. AU$0.00 - AU$999.99
  2. AU$1,000.00 and above

Front Axle & Suspension

Items 1 to 100 of 137 total

Page:
  1. 1
  2. 2

List  Grid 

  1. 2 Inch Lowered Stub Axle Set

    2 Inch Lowered Stub Axle Set
    Matched set of 2. These brand new lowered stub axles are suitable for use in all Chrysler Valiant models, including Charger. Open to see application notes. Learn More
    AU$1,439.00
    Set
    Details

  2. 2" Lowered Stub Axles set with Lower Ball Joints and Spindle Hardware Package.

    2" Lowered Stub Axles set with Lower Ball Joints and Spindle Hardware Package.
    These high quality stub axles have been manufactured in Australia and are supplied with engineer certifications Learn More
    AU$1,613.00
    Details

  3. 27-Mm Front Swaybar Kit : VE/VF/VG/VH/VJ/VJ/VK/CL/CM

    27-Mm Front Swaybar Kit : VE/VF/VG/VH/VJ/VJ/VK/CL/CM
    27-mm front swaybar kit - suits all ve, VF, VG, VH, VJ, VK, CL & CM chrysler/valiant vehicles using the factory swaybar mounts on the lower control arms. Learn More
    AU$319.50
    Each
    Details

  4. Adjustable Upper Control Arm Set : suit Chrysler Valiant

    Adjustable Upper Control Arm Set : suit Chrysler Valiant
    These high quality adjustable upper control arms are imported from the USA and are a direct replacement for the factory fitted arms in Australian Valiant vehicles. Learn More
    AU$1,069.00
    Details

  5. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 18mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 18mm bar
    (1) | Add Your Review
    Replacement bush for use with 18mm rear sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$17.50

    Special Price AU$15.75

    Set of 2
    Details

  6. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 20mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 20mm bar
    Replacement bush for use with 20mm rear sway bar fitted using aftermarket mounting brackets. {INSERT_DOC_28} Learn More

    Regular Price: AU$17.50

    Special Price AU$15.75

    Set of 2
    Details

  7. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 22mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 22mm bar
    Replacement bush for use with 22mm front sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$17.50

    Special Price AU$16.63

    Set of 2
    Details

  8. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 24mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 24mm bar
    (2) | Add Your Review
    Replacement bush for use with 24mm front sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More
    AU$17.50
    Set of 2
    Details

  9. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 25mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 25mm bar
    Replacement bush for use with 25mm front sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$17.50

    Special Price AU$15.75

    Set of 2
    Details

  10. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 27mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 27mm bar
    Replacement bush for use with 27mm front sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$17.50

    Special Price AU$15.75

    Set of 2
    Details

  11. Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 30mm bar

    Aftermarket Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 30mm bar
    (3) | Add Your Review
    Replacement bush for use with 30mm front sway bar fitted using aftermarket mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$17.50

    Special Price AU$15.75

    Set of 2
    Details

  12. Aftermarket Front Wheel Bearing Grease Dust Cap : suit VG/VH/VJ/VK/CL/CM Disc Brakes & VG Drum Brakes

    Aftermarket Front Wheel Bearing Grease Dust Cap : suit VG/VH/VJ/VK/CL/CM Disc Brakes & VG Drum Brakes
    (4) | Add Your Review
    They do look a little different to factory, but they are a suitable replacement. Learn More

    Regular Price: AU$9.90

    Special Price AU$8.91

    Set of 2
    Details

  13. Ball & Trunion Tailshaft Boot & Strap Set : suit RV1/SV1/AP5

    Ball & Trunion Tailshaft Boot & Strap Set : suit RV1/SV1/AP5
    Direct replacement rubber boot and strap kit to suit driveshafts using front ball & trunion joint. Suitable for RV1-VC models with 3.5" trunion housing. Direct replacement reproduction rubber product... Learn More

    Regular Price: AU$89.00

    Special Price AU$84.55

    Details

  14. Billet Steel Lower Ball Joint Bolt

    Billet Steel Lower Ball Joint Bolt
    (2) | Add Your Review
    High quality OEM style billet machined bold. Suitable for use in AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM vehicles and USA A-body models. Learn More
    AU$24.90
    Each
    Details

  15. Camber/Caster Adjusting Bolt PAIR : suit Upper Control Arm (eccentric bolts)

    Camber/Caster Adjusting Bolt PAIR : suit Upper Control Arm (eccentric bolts)
    (2) | Add Your Review
    Sold as per upper control arm kit. Suitable for use on all Chrysler, Dodge, Valiant & Plymouth muscle cars. Learn More

    Regular Price: AU$44.99

    Special Price AU$40.49

    Each
    Details

  16. Centura Sway Bar Mount to Chassis Bush Pair

    Centura Sway Bar Mount to Chassis Bush Pair
    No further information currently available. This product is sold as a pair. Learn More
    AU$14.80
    pr
    Details

  17. Complete Front Sway Bar Conversion Kit (30mm) : suit VE/VF/VG/VH/VJ/VK/CL/CM

    Complete Front Sway Bar Conversion Kit (30mm) : suit VE/VF/VG/VH/VJ/VK/CL/CM
    (3) | Add Your Review
    Suitable for use on VE, VF, VG, VH, VJ, VK, CL & CM vehicles. This complete conversion kit includes everything you need for a non-sway bar factory vehicle. Learn More
    AU$499.00
    Details

  18. Disc Brake Caliper to Stub Axle Bolt Set (4x)

    Disc Brake Caliper to Stub Axle Bolt Set (4x)
    (2) | Add Your Review
    New Grade 8 Bolts, 7/16 Hex Head Learn More
    AU$25.00
    Details

  19. Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 20mm bar

    Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 20mm bar
    Replacement bush for use with 20mm front sway bar fitted using factory mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More
    AU$37.00
    Set of 2
    Details

  20. Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 22mm bar

    Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 22mm bar
    (1) | Add Your Review
    Replacement bush for use with 22mm front sway bar fitted using factory mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$34.99

    Special Price AU$31.49

    Set of 2
    Details

  21. Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 24mm bar

    Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 24mm bar
    (3) | Add Your Review
    Replacement bush for use with 24mm front sway bar fitted using factory mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$37.00

    Special Price AU$33.30

    Set of 2
    Details

  22. Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 25mm/26mm bar

    Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 25mm/26mm bar
    Replacement bush for use with 25mm & 26mm front sway bar fitted using factory mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup... Learn More

    Regular Price: AU$37.00

    Special Price AU$33.30

    Set of 2
    Details

  23. Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 27mm bar

    Factory Anti-Sway Bar K-Frame Mount Bush (MDI) : suit 27mm bar
    Replacement bush for use with 27mm front sway bar fitted using factory mounting brackets. About our Polyurethane componenet: We are one of very few companies that has setup to use... Learn More

    Regular Price: AU$37.00

    Special Price AU$33.30

    Set of 2
    Details

  24. Front Axle Hub Seal : suit HP Disc Kit

    Front Axle Hub Seal : suit HP Disc Kit
    High quality front axle hub seal (front wheel bearing seal) for use on vehicles running a Hemi Performance disc brake kit. Learn More

    Regular Price: AU$8.00

    Special Price AU$7.60

    Each
    Details

  25. Front Axle Hub Seal : suit RV1/SV1/AP5/AP6/VC/VE/VF

    Front Axle Hub Seal : suit RV1/SV1/AP5/AP6/VC/VE/VF
    High quality front axle hub seal (front wheel bearing seal) for use on vehicles fitted with solid disc brake sub axles (RV1, SV1, AP5, AP6, VC, VE, & VF.) Learn More

    Regular Price: AU$6.50

    Special Price AU$5.85

    Each
    Details

  26. Front Axle Hub Seal : suit VG/VH/VJ/VK/CL/CM & Centura

    Front Axle Hub Seal : suit VG/VH/VJ/VK/CL/CM & Centura
    (3) | Add Your Review
    High quality front axle hub seal (front wheel bearing seal) for use on vehicles fitted with vented disc brake sub axles (VG, VH, VJ, VK, CL, CM.) Learn More

    Regular Price: AU$6.85

    Special Price AU$6.17

    Each
    Details

  27. Front Sway Bar & K-Frame Mount Kit, (24mm) : suit AP5/AP6/VC Valiant

    Front Sway Bar & K-Frame Mount Kit, (24mm) : suit AP5/AP6/VC Valiant
    Any high performance vehicle should have a sway bar fitted, upgrade your factory one, or add one to your vehicle today. Suits AP5 / AP6 & VC vehicles. Learn More
    AU$349.00
    Each
    Details

  28. Front Sway Bar & K-Frame Mount Kit, (30mm) : suit VE/VF/VG/VH/VJ/VK/CL/CM Valiant

    Front Sway Bar & K-Frame Mount Kit, (30mm) : suit VE/VF/VG/VH/VJ/VK/CL/CM Valiant
    (6) | Add Your Review
    Any high performance vehicle should have a sway bar fitted, upgrade your factory one, or add one to your vehicle today. Suits VE, VF, VG, VH, VJ, VK, CL & CM vehicles. Learn More
    AU$399.00
    Each
    Details

  29. Front Sway Bar Mount Kit : suit VH/VJ/VK/CL/CM K-Frame

    Front Sway Bar Mount Kit : suit VH/VJ/VK/CL/CM K-Frame
    (1) | Add Your Review
    Suit all models from VE-CM running aftermarket or original sway bar Learn More
    AU$69.90
    Each
    Details

  30. Front Wheel Bearing & Seal Set : suit HP Disc Kit (2x required)

    Front Wheel Bearing & Seal Set : suit HP Disc Kit (2x required)
    (3) | Add Your Review
    Sold as single wheel set. 2x required overall. High quality bearings and seals for use on vehicles running Hemi Performance disc brake kits. Learn More

    Regular Price: AU$30.75

    Special Price AU$29.21

    Details

  31. Front Wheel Bearing & Seal Set : suit RV1/SV1/AP5/AP6/VC/VE/VF

    Front Wheel Bearing & Seal Set : suit RV1/SV1/AP5/AP6/VC/VE/VF
    (1) | Add Your Review
    For use on RV1-VF stub axles. Set includes inner & outer bearings, shells and seal for ONE wheel. Learn More
    AU$35.00
    Each
    Details

  32. Front Wheel Bearing Kit : Chrysler / Dodge / Plymouth (A/B/E/C-Body) (Disc Brakes)

    Front Wheel Bearing Kit : Chrysler / Dodge / Plymouth (A/B/E/C-Body) (Disc Brakes)
    Direct replacement front wheel bearing kit to suit all Chrysler, Dodge & Plymouth vehicles fitted with factory disc brakes. complete set includes inner bearing, outer bearing & seal. two sets... Learn More

    Regular Price: AU$78.13

    Special Price AU$70.32

    Each
    Details

  33. Front Wheel Bearing Retainer Package : suit VG/VH/VJ/VK/CK/CM (with vented discs)

    Front Wheel Bearing Retainer Package : suit VG/VH/VJ/VK/CK/CM (with vented discs)
    (5) | Add Your Review
    Perfectly reproduced wheel bearing retaining set, complete with stub axle nut, lock-cage, washer & split pin. suits all vehicles using stub axles from VG/VH/VJ/VJ/VK/CL/CM models. Quality reproduction Stainless steel and... Learn More
    AU$28.30
    Details

  34. Front Wheel Bearing Thrust Washer : suit RV1/SV1/AP5/AP6/VC/VE/VF

    Front Wheel Bearing Thrust Washer : suit RV1/SV1/AP5/AP6/VC/VE/VF
    Suitable for RV1, SV1, AP5, AP6, VC, VE, & VF model Valiant vehicles running drum brakes or solid disc rotors. This high quality steel washer has been precision laser cut... Learn More

    Regular Price: AU$10.00

    Special Price AU$9.00

    Set of 2
    Details

  35. Front Wheel Bearing Thrust Washer : suit VG/VH/VJ/VK/CL/CM (with vented discs)

    Front Wheel Bearing Thrust Washer : suit VG/VH/VJ/VK/CL/CM (with vented discs)
    (2) | Add Your Review
    Suitable for VG, VH, VJ, VK, CK & CM model Valiant vehicles running disc brakes. This high quality steel washer has been precision laser cut from for it's intended purpose;... Learn More

    Regular Price: AU$10.00

    Special Price AU$9.00

    Set of 2
    Details

  36. Front Wheel Inner Bearing & Shell (RV1-VF)

    Front Wheel Inner Bearing & Shell (RV1-VF)
    Set includes inner bearing and shell for one wheel. Suitable for use on RV1, SV1, AP5, AP6, VC, VE & VF Stub Axles. Please note: 1 set required per wheel.... Learn More
    AU$12.85
    ea
    Details

  37. Front Wheel Inner Bearing & Shell : suit VG/VH/VJ/VK/CL/CM

    Front Wheel Inner Bearing & Shell : suit VG/VH/VJ/VK/CL/CM
    (1) | Add Your Review
    High quality front wheel inner bearing and shell for use on vehicles fitted with vented disc brake sub axles (VG, VH, VJ, VK, CL, CM.) Learn More

    Regular Price: AU$17.70

    Special Price AU$16.82

    Each
    Details

  38. Front Wheel Outer Bearing & Shell (RV1-VF)

    Front Wheel Outer Bearing & Shell (RV1-VF)
    Set includes outer bearing and shell for one wheel. Suitable for use on RV1, SV1, AP5, AP6, VC, VE & VF Stub Axles. Please note: 1 set required per wheel.... Learn More
    AU$12.85
    ea
    Details

  39. Front Wheel Outer Bearing & Shell : suit VG/VH/VJ/VK/CL/CM

    Front Wheel Outer Bearing & Shell : suit VG/VH/VJ/VK/CL/CM
    (1) | Add Your Review
    High quality front wheel outer bearing and shell for use on vehicles fitted with vented disc brake sub axles (VG, VH, VJ, VK, CL, CM.) Learn More

    Regular Price: AU$12.85

    Special Price AU$12.21

    Each
    Details

  40. Heavy Duty Lower Control Arm (no sway bar mount) : suit Valiant (left hand side)

    Heavy Duty Lower Control Arm (no sway bar mount) : suit Valiant (left hand side)
    Suitable for use in all models (AP5-CM.) Are your control arms, bushes, and ball joints worn, perished or weathered? Let Hemi Performance supply you a reconditioned set! Learn More
    AU$225.00
    Each
    Details

  41. Heavy Duty Lower Control Arm (no sway bar mount) : suit Valiant (right hand side)

    Heavy Duty Lower Control Arm (no sway bar mount) : suit Valiant (right hand side)
    Suitable for use in all models (AP5-CM.) Are your control arms, bushes, and ball joints worn, perished or weathered? Let Hemi Performance supply you a reconditioned set! Learn More
    AU$225.00
    Each
    Details

  42. Heavy Duty Lower Control Arm (with sway bar mount) : suit Valiant (left hand side)

    Heavy Duty Lower Control Arm (with sway bar mount) : suit Valiant (left hand side)
    Suitable for use in all models (AP5-CM.) Are your control arms, bushes, and ball joints worn, perished or weathered? Let Hemi Performance supply you a reconditioned set! Learn More
    AU$225.00
    Each
    Details

  43. Heavy Duty Lower Control Arm (with sway bar mount) : suit Valiant (right hand side)

    Heavy Duty Lower Control Arm (with sway bar mount) : suit Valiant (right hand side)
    Suitable for use in all models (AP5-CM.) Are your control arms, bushes, and ball joints worn, perished or weathered? Let Hemi Performance supply you a reconditioned set! Learn More
    AU$225.00
    Each
    Details

  44. Hex Lock/Conelock Nut 7/16 UNF

    Hex Lock/Conelock Nut 7/16 UNF
    Learn More

    Regular Price: AU$1.50

    Special Price AU$1.35

    Each
    Details

  45. HP Front Suspension & Steering Rebuild Kit : suit AP6 (with V8) & VC

    HP Front Suspension & Steering Rebuild Kit : suit AP6 (with V8) & VC
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit all VC models and eight cylinder AP6 models. Learn More
    AU$510.00
    Details

  46. HP Front Suspension & Steering Rebuild Kit : suit CL/CM (with manual steering)

    HP Front Suspension & Steering Rebuild Kit : suit CL/CM (with manual steering)
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit CL & CM models fitted with manual steering box. Learn More
    AU$520.00
    Details

  47. HP Front Suspension & Steering Rebuild Kit : suit CL/CM (with power steering)

    HP Front Suspension & Steering Rebuild Kit : suit CL/CM (with power steering)
    (1) | Add Your Review
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit CL & CM models fitted with power steering box. Learn More
    AU$525.00
    Details

  48. HP Front Suspension & Steering Rebuild Kit : suit RV1 & early SV1 (smaller lower control arm bush)

    HP Front Suspension & Steering Rebuild Kit : suit RV1 & early SV1 (smaller lower control arm bush)
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit RV1 & SV1 running manual steering box. SMALL size lower control arm bushes. Learn More
    AU$510.00
    Details

  49. HP Front Suspension & Steering Rebuild Kit : suit SV1/AP5 & Early AP6

    HP Front Suspension & Steering Rebuild Kit : suit SV1/AP5 & Early AP6
    (1) | Add Your Review
    NOW BONUS STEERING COUPLING REPAIR KIT -. Suit SV1, AP5 & AP6 running manual steering box. AP6 model only suitable for 6 cylinder engines. Learn More
    AU$510.00
    Details

  50. HP Front Suspension & Steering Rebuild Kit : suit SV1/AP5/AP6 (AP6 6cyl only) : UPGRADE to MOOG two-piece brake rod reaction bar bush set

    HP Front Suspension & Steering Rebuild Kit : suit SV1/AP5/AP6 (AP6 6cyl only) : UPGRADE to MOOG two-piece brake rod reaction bar bush set
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit SV1, AP5 & AP6 running manual steering box. Upgrade late model style two-piece brake rod reaction bar bushes with the included MOOG conversion. Learn More
    AU$639.00
    Details

  51. HP Front Suspension & Steering Rebuild Kit : suit VC & 8cyl AP6 (with solid disc brake rotors)

    HP Front Suspension & Steering Rebuild Kit : suit VC & 8cyl AP6 (with solid disc brake rotors)
    Suit all VC models and eight cylinder AP6 models that are equipped with Solid Disc Braking system. Learn More
    AU$510.00
    Details

  52. HP Front Suspension & Steering Rebuild Kit : suit VE/VF (with solid disc brake rotors)

    HP Front Suspension & Steering Rebuild Kit : suit VE/VF (with solid disc brake rotors)
    (2) | Add Your Review
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit VE/VF models fitted with solid disc brake rotors) Learn More
    AU$530.00
    Details

  53. HP Front Suspension & Steering Rebuild Kit : suit VE/VF/VG/VH Manual Steering

    HP Front Suspension & Steering Rebuild Kit : suit VE/VF/VG/VH Manual Steering
    (2) | Add Your Review
    NOW BONUS STEERING COUPLING REPAIR KIT! - Suit VE, VF, VG & VH models with manual steering Learn More
    AU$490.00
    Details

  54. HP Front Suspension & Steering Rebuild Kit : suit VJ/VK (with manual steering)

    HP Front Suspension & Steering Rebuild Kit : suit VJ/VK (with manual steering)
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit late VJ & VK models fitted with manual steering box & early VJ with power steering box. Learn More
    AU$540.00
    Details

  55. HP Front Suspension & Steering Rebuild Kit : suit VJ/VK (with power steering)

    HP Front Suspension & Steering Rebuild Kit : suit VJ/VK (with power steering)
    NOW BONUS STEERING COUPLING REPAIR KIT - Suit late VJ & VK models fitted with power steering box. Learn More
    AU$540.00
    Details

  56. HP Lower Ball Joint (Left Hand) [Lifetime Warranty] : suit solid discs

    HP Lower Ball Joint (Left Hand) [Lifetime Warranty] : suit solid discs
    (1) | Add Your Review
    These high quality exclusive Hemi Performance ball joints are suitable for use with SOLID DISC braking system fitted Chrysler/Valiant vehicles. Learn More

    Regular Price: AU$82.10

    Special Price AU$73.89

    Each
    Details

  57. HP Lower Ball Joint (Right Hand), [Lifetime Warranty] : suit solid discs

    HP Lower Ball Joint (Right Hand), [Lifetime Warranty] : suit solid discs
    (3) | Add Your Review
    These high quality exclusive Hemi Performance ball joints are suitable for use with SOLID DISC braking system fitted Chrysler/Valiant vehicles. Learn More

    Regular Price: AU$82.10

    Special Price AU$73.89

    Each
    Details

  58. HP Lower Ball Joint Set Lifetime Warranty]

    HP Lower Ball Joint Set Lifetime Warranty]
    (3) | Add Your Review
    These high quality exclusive Hemi Performance ball joints are suitable for all Chrysler/Valiant vehicles that were fitted with vented disc or drum bakes (NOT solid discs.) Learn More
    AU$119.00
    Details

  59. HP Lower Ball Joint, Left Hand [Lifetime Warranty] SV1/RV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM

    HP Lower Ball Joint, Left Hand [Lifetime Warranty] SV1/RV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
    (5) | Add Your Review
    These high quality exclusive Hemi Performance ball joints are suitable for all Chrysler/Valiant vehicles that were fitted with vented disc or drum bakes (NOT solid discs.) Learn More
    AU$59.90
    Each
    Details

  60. HP Lower Ball Joint, Right Hand [Lifetime Warranty] SV1/RV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM

    HP Lower Ball Joint, Right Hand [Lifetime Warranty] SV1/RV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
    (4) | Add Your Review
    These high quality exclusive Hemi Performance ball joints are suitable for all Chrysler/Valiant vehicles that were fitted with vented disc or drum bakes (NOT solid discs.) Learn More
    AU$59.90
    Each
    Details

  61. HP Upper Ball Joint : Suit 1962-72 A body & 1960-62 Valiant/Lancer

    HP Upper Ball Joint : Suit 1962-72 A body & 1960-62 Valiant/Lancer
    Alternate/OEM Part Number(s): 2084837, 2298533, 2298704, 3514974, 4532483, K706, 7022 Learn More
    AU$36.50
    Details

  62. HP Upper Ball Joint [Lifetime Warranty]

    HP Upper Ball Joint [Lifetime Warranty]
    (7) | Add Your Review
    Suit all models (SV1 - CM) Our Exclusive HEMI PERFORMANCE steering components. Hemi Performance is proud to offer the most premium & conclusive steering and suspension components available for your... Learn More
    AU$36.50
    Each
    Details

  63. Leaf Spring Eye-Bush Bolt Set : 6-Cylinder

    Leaf Spring Eye-Bush Bolt Set : 6-Cylinder
    Original equipment style fastener package to suit all 6-cylinder leaf spring eye bush mounting. Complete with two correct hi-tensile bolts and locking nuts. Fits 1.5-inch eye bush with 7/16'' bolt.... Learn More

    Regular Price: AU$8.50

    Special Price AU$8.08

    Details

  64. Leaf Spring Eye-Bush Bolt Set : 8-Cylinder

    Leaf Spring Eye-Bush Bolt Set : 8-Cylinder
    Original equipment style fastener package to suit all 8-cylinder leaf spring eye bush mounting. Complete with two correct hi-tensile bolts and locking nuts. Fits 2-inch eye bush with 5/8'' bolt.... Learn More

    Regular Price: AU$8.50

    Special Price AU$8.08

    Details

  65. Lower Ball Joint & Caliper Bolt Lock Tab Set

    Lower Ball Joint & Caliper Bolt Lock Tab Set
    (13) | Add Your Review
    These high quality factory reproductions will ensure that your bolts don't come loose whilst retaining a factory look. Learn More

    Regular Price: AU$19.00

    Special Price AU$18.05

    Each
    Details

  66. Lower Ball Joint (Left Hand), WASP

    Lower Ball Joint (Left Hand), WASP
    (1) | Add Your Review
    Suit all models (except solid disc brakes) Genuine WASP - Quality steering component. For the budget conscience, we are happy to offer the WASP range of steering components. We offer... Learn More
    AU$44.80
    Each
    Details

  67. Lower Ball Joint (Right Hand), WASP

    Lower Ball Joint (Right Hand), WASP
    Suit all models (except solid disc brakes) Genuine WASP - Quality steering component. For the budget conscience, we are happy to offer the WASP range of steering components. We offer... Learn More
    AU$44.80
    Each
    Details

  68. Lower Ball Joint : MOOG : LEFT: Suit 1965-72 A body WITH disc brakes

    Lower Ball Joint : MOOG : LEFT: Suit 1965-72 A body WITH disc brakes
    (Alternate/OEM Part Number(s): 2585593, 2948606, 3004870, 3420162, 4532490 ) Learn More

    Regular Price: AU$245.30

    Special Price AU$220.77

    Each
    Details

  69. Lower Ball Joint : MOOG : RIGHT : Suit 1965-72 A body WITH disk brakes

    Lower Ball Joint : MOOG : RIGHT : Suit 1965-72 A body WITH disk brakes
    Alternate/OEM Part Number(s): 2585594, 2948607, 3004871, 3420163, 4532491 Learn More

    Regular Price: AU$245.30

    Special Price AU$220.77

    Each
    Details

  70. Lower Ball Joint : MOOG : RIGHT: Suit 1965-72 A body with DRUM brakes

    Lower Ball Joint : MOOG : RIGHT: Suit 1965-72 A body with DRUM brakes
    Alternate/OEM Part Number(s): 2275465, 2948605, 3004869, 3420161 Learn More
    AU$239.00
    Each
    Details

  71. Lower Ball Joint suit Centura KB-KC CHRYSLER 1975 - 1978

    Lower Ball Joint suit Centura KB-KC CHRYSLER 1975 - 1978
    Will fit all KB-KC models with 4 & 6 Cylinder engines. Learn More

    Regular Price: AU$55.00

    Special Price AU$52.25

    Each
    Details

  72. Lower Control Arm Bump Stop (MDI) : Charger R/T Reproduction

    Lower Control Arm Bump Stop (MDI) : Charger R/T Reproduction
    (11) | Add Your Review
    These bump stops are fitted to your upper control arms, they are suitable for all Chrysler/Valiant models from AP5-CM. Learn More

    Regular Price: AU$43.00

    Special Price AU$38.70

    Set of 2
    Details

  73. Lower Control Arm Inner Bush Set : suit Centura KB/KC

    Lower Control Arm Inner Bush Set : suit Centura KB/KC
    Set contains: 4 Bushes and 4 Inner Tubes . Suits CHRYSLER Centura KB - KC Sedan. Learn More

    Regular Price: AU$35.40

    Special Price AU$33.63

    Set
    Details

  74. Machined Alloy Washer for Brake Rod Reaction Bar Bush : suit VJ/VK/CL/CM (two-piece type bush)

    Machined Alloy Washer for Brake Rod Reaction Bar Bush : suit VJ/VK/CL/CM (two-piece type bush)
    High quality replacement washers machined out of T5 aircraft grade aluminium. Suitable for VJ/VK/CL/CM models. Learn More

    Regular Price: AU$15.00

    Special Price AU$13.50

    Each
    Details

  75. MDI Anti-Sway Bar Link Eye Bush

    MDI Anti-Sway Bar Link Eye Bush
    (6) | Add Your Review
    Direct replacement sway bar link bush, made specifically for Australia Valiant vehicles. Suitable for use with factory and after market sway bars. About our Polyurethane componenet: We are one of... Learn More

    Regular Price: AU$22.00

    Special Price AU$20.90

    Set of 8
    Details

  76. MDI Brake Rod Reaction Bar Bush & Alloy Washer Set (two-piece) : suit VJ/VK/CL/CM

    MDI Brake Rod Reaction Bar Bush & Alloy Washer Set (two-piece) : suit VJ/VK/CL/CM
    Suitable for use in VJ/VK/CL/CM models factory fitted with "two-piece" bushes. Kit Contents: 2x 4x Learn More

    Regular Price: AU$109.00

    Special Price AU$103.55

    Details

  77. MDI Brake Rod Reaction Bar Bush & Crush Tube : suit VJ/VK/CL/CM

    MDI Brake Rod Reaction Bar Bush & Crush Tube : suit VJ/VK/CL/CM
    (4) | Add Your Review
    Suitable for use in VJ/VK/CL/CM. Note: a "set of 2" is enough for one car. About our Polyurethane componenet: We are one of very few companies that has setup to... Learn More

    Regular Price: AU$45.00

    Special Price AU$42.75

    Set of 2
    Details

  78. MDI Brake Rod Reaction Bar Bush (single-piece) : Suit SV1/AP5/AP6/VC/VE/VF/VG/VH

    MDI Brake Rod Reaction Bar Bush (single-piece) : Suit SV1/AP5/AP6/VC/VE/VF/VG/VH
    (2) | Add Your Review
    Suitable for use on SV1, AP5, AP6, VC, VE, VF, VG and VH. About our Polyurethane componenet: We are one of very few companies that has setup to use newer... Learn More

    Regular Price: AU$25.00

    Special Price AU$23.75

    Set of 2
    Details

  79. MDI Lower Control Arm Inner Bush : suit AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM: (ID:20.80mm / OD:35.00mm)

    MDI Lower Control Arm Inner Bush : suit AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM: (ID:20.80mm / OD:35.00mm)
    (4) | Add Your Review
    High quality reproduction of the factory fitted lower control arm inner bushes. Hemi Performance have meticulously reproduced this item in their exclusive MDI polyurethane. Suitable for use in AP5, AP6,... Learn More

    Regular Price: AU$44.00

    Special Price AU$41.80

    Set of 2
    Details

  80. MDI Lower Control Arm Inner Bush : suit RV1/SV1: (ID:20.80mm / OD:30.70mm)

    MDI Lower Control Arm Inner Bush : suit RV1/SV1: (ID:20.80mm / OD:30.70mm)
    High quality reproduction of the factory fitted lower control arm inner bushes. Hemi Performance have meticulously reproduced this item in their exclusive MDI polyurethane. Specifically manufactured for use in RV1... Learn More

    Regular Price: AU$69.00

    Special Price AU$62.10

    Set of 2
    Details

  81. MDI Stage 1 Suspension Bush Rebuild Kit (Customisable)

    MDI Stage 1 Suspension Bush Rebuild Kit (Customisable)
    Buy our exclusive MDI polyurethane suspension bush rebuild package to restore your suspension to working order. Learn More
    AU$275.00 As low as: AU$97.00
    Details

  82. MDI Stage 1 Suspension Bush Rebuild Kit (virtual)

    MDI Stage 1 Suspension Bush Rebuild Kit (virtual)
    Learn More
    AU$200.00
    Details

  83. MDI Stage 2 Suspension Bush & Ball Joint Rebuild Kit (Customisable)

    MDI Stage 2 Suspension Bush & Ball Joint Rebuild Kit (Customisable)
    Buy our exclusive MDI polyurethane suspension bush rebuild package to restore your suspension to working order. Learn More
    AU$445.00 As low as: AU$143.00
    kit
    Details

  84. MDI Stage 3 Suspension Rebuild Kit & Control Arms (Customisable)

    MDI Stage 3 Suspension Rebuild Kit & Control Arms (Customisable)
    Buy our exclusive MDI polyurethane suspension bush rebuild package complete with ready-to-fit professionally reconditioned control arms to restore your suspension to working order. Learn More
    AU$989.00 As low as: AU$794.00
    kit
    Details

  85. MDI Torsion Bar Boot

    MDI Torsion Bar Boot
    (12) | Add Your Review
    High quality MDI torsion bar boots, exclusive to Hemi Performance. Suitable for all Chrysler Valiant models. Learn More

    Regular Price: AU$27.90

    Special Price AU$25.11

    Set of 2
    Details

  86. MDI Upper Control Arm Bush : suit RV1-CM Valiant

    MDI Upper Control Arm Bush : suit RV1-CM Valiant
    (6) | Add Your Review
    Suitable for use on all Chrysler/Valiant models (RV1, SV1, AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.) Learn More
    AU$89.00
    Set of 4
    Details

  87. MOOG Control Arm Bump Stop Set (2x Upper & Lower)

    MOOG Control Arm Bump Stop Set (2x Upper & Lower)
    (2) | Add Your Review
    Suitable for use on all Chrysler/Valiant models (AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.) Made of high quality rubber. Learn More
    AU$89.00
    Details

  88. MOOG Lower Control Arm Bush : suit 1965-1973 C-BODY (Alternate/OEM Part Number: 2269189)

    MOOG Lower Control Arm Bush : suit 1965-1973 C-BODY (Alternate/OEM Part Number: 2269189)
    Moog bushings are designed to absorb vibration and noise and deliver better handling, while providing the performance of urethane without the "squeak" normally associated with it. They are not affected... Learn More

    Regular Price: AU$52.90

    Special Price AU$47.61

    Each
    Details

  89. MOOG Rubber Sway Link Bar (incl bushes) : suit Valiant

    MOOG Rubber Sway Link Bar (incl bushes) : suit Valiant
    (7) | Add Your Review
    High Quality USA made MOOG suspension component. One purchase required per sway bar. Suitable for use with factory or aftermarket sway bar kits. Learn More

    Regular Price: AU$44.95

    Special Price AU$42.70

    Set of 2
    Details

  90. MOOG Rubber Upper Control Arm Bump Stop

    MOOG Rubber Upper Control Arm Bump Stop
    (3) | Add Your Review
    Factory correct " Upper control arm bumper " As found on all Chrysler & Valiant models. This restoration components offer factory-like rubber bumper reaction whilst retaining factory-correct aesthetics. Sold individually... Learn More

    Regular Price: AU$14.99

    Special Price AU$14.24

    Each
    Details

  91. MOOG Single-Piece Rubber Brake Rod Reaction Bar Bushing Upgrade/Conversion Set : suit SV1/AP5/AP6/VC/VE/VF/VG/VH

    MOOG Single-Piece Rubber Brake Rod Reaction Bar Bushing Upgrade/Conversion Set : suit SV1/AP5/AP6/VC/VE/VF/VG/VH
    (2) | Add Your Review
    This kit will convert your factory 'single-piece' brake rod reaction bar bushes to the later model (better) two-piece style. Suitable for use in SV1, AP5, AP6, VC, VE, VF, VG... Learn More

    Regular Price: AU$97.66

    Special Price AU$92.78

    Each
    Details

  92. MOOG Stabilizer Bar to Frame Bushing - Suit: Dodge 1970-76 (Alternate/OEM Part Number(s): 496342, 2269709, 3690609, 3742254, 384725, 387783, 388292, 388293, 388294, 389098, 390197, 392592, 396420, 457924, D2SZ5493A, D4ZZ5493B )

    MOOG Stabilizer Bar to Frame Bushing - Suit: Dodge 1970-76 (Alternate/OEM Part Number(s): 496342, 2269709, 3690609, 3742254, 384725, 387783, 388292, 388293, 388294, 389098, 390197, 392592, 396420, 457924, D2SZ5493A, D4ZZ5493B )
    Moog Ball Joint housings are forged and/or machined from a single block of fine-grain alloy steel, providing unequaled strength and durability. Powdered-metal gusher bearings, with grease grooves, resist wear better... Learn More

    Regular Price: AU$44.00

    Special Price AU$39.60

    Each
    Details

  93. MOOG Upper Control Arm Offset Bush Set : suit AP5-CM (per arm)

    MOOG Upper Control Arm Offset Bush Set : suit AP5-CM (per arm)
    These high quality eccentric MOOG upper control arm bushes are suitable for use in all Chrysler Valiant models: AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.... Learn More
    AU$100.10
    Each
    Details

  94. Mopar Torsion Bar Boot & Locking Clip Set

    Mopar Torsion Bar Boot & Locking Clip Set
    (1) | Add Your Review
    These licensed mopar authentic restoration products are manufactured from original tooling, promising perfect fit & factory look! These genuine mopar rubber replacements are guaranteed to seal & fit the way they should. Replacement clips are also provided in the kit. Learn More

    Regular Price: AU$87.17

    Special Price AU$78.45

    Set
    Details

  95. New Steel Lower Control Arm Pin : suit RV1-CM

    New Steel Lower Control Arm Pin : suit RV1-CM
    (1) | Add Your Review
    Replace your old and worn control arm pins with these brand new perfect factory reproductions. Suitable for all models RV1-CM. Learn More
    AU$69.00
    Set of 2
    Details

  96. New Steel Lower Control Arm Pin Set (Includes Washers, and Nyloc Nuts)

    New Steel Lower Control Arm Pin Set (Includes Washers, and Nyloc Nuts)
    Replace your old and worn control arm pins with these brand new perfect factory reproductions. Supplied complete with correct replacement washers and nyloc nuts. Suitable for RV1, SV1, AP5, AP6,... Learn More
    AU$89.00
    Details

  97. New Torsion Bar 0.890 Inch : suit RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM

    New Torsion Bar 0.890 Inch : suit RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
    NEW USA made Torsion Bars are forged for ultimate strength, durability, and handling! Learn More
    AU$1,249.00
    Set of 2
    Details

  98. New Torsion Bar 1.03/1.06 Inch : suit RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM

    New Torsion Bar 1.03/1.06 Inch : suit RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
    (3) | Add Your Review
    NEW USA made Torsion Bars are forged for ultimate strength, durability, and handling! Learn More
    AU$1,159.00
    Set of 2
    Details

  99. OBSOLETE - MOOG Heavy Duty Urethane Sway Link Bar (incl bushes) : suit Valiant

    OBSOLETE - MOOG Heavy Duty Urethane Sway Link Bar (incl bushes) : suit Valiant
    High Quality USA made MOOG suspension component. One purchase required per sway bar. Suitable for use with factory or aftermarket sway bar kits. Learn More
    AU$48.99
    Set of 2
    Details

    Currently Unavailable

  100. OBSOLETE - MOOG Lower Control Arm Rubber Bush : suit AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM

    OBSOLETE - MOOG Lower Control Arm Rubber Bush : suit AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
    Suitable for use in all Australian Valiant control arms, for models AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM. About MOOG Suspension Parts: Bring “like-new” handling... Learn More
    AU$59.90
    Set of 2
    Details

    Currently Unavailable

Items 1 to 100 of 137 total

Page:
  1. 1
  2. 2

List  Grid 

Information

Why buy from us

My account

Contacts

LOCKED BAG 1, BILAMBIL, NSW, 2486, AUSTRALIA TEL: +61 (07) 5599 9627
     
 
All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, logos, and brands does not imply endorsement.
 
© Hemi Performance. All Rights Reserved.