Control Arm
-
Adjustable Upper Control Arm Set : suit Chrysler Valiant
Important note: You must modify your stub axles to suit, the upper ball joint hole just be enlarged to allow heavy-duty upper control arm pin to fit correctly. These high... Learn MoreExpected ship date:Next Business DayAU$1,580.00 -
Energy Suspension Front Control Arm Bushing Set, Black Polyurethane – Mopar B-Body 1973–79 Charger, Road Runner, Cordoba
Tighten up a tired 1973-on Mopar B-body front end. This Energy Suspension set replaces soft, perished factory control arm rubbers with black HYPER-Flex performance polyurethane. It presses into your original... Learn MoreExpected ship date:16 Nov 2026(if ordered today)AU$164.95Each -
Lower Control Arm Bump Stop (MDI) : Charger R/T Reproduction
These bump stops are fitted to your upper control arms, they are suitable for all Chrysler/Valiant models from AP5-CM. Learn MoreExpected ship date:Next Business DayAU$51.25Set of 2 -
Lower Control Arm Bush : suit 1965-1973 C-BODY (Alternate/OEM Part Number: 2269189)
These bushings are designed to absorb vibration and noise and deliver better handling, while providing the performance of urethane without the "squeak" normally associated with it. They are not affected... Learn MoreExpected ship date:Next Business DayAU$52.90Each -
Lower Control Arm Inner Bush Set : suit Centura KB/KC
Set contains: 4 Bushes and 4 Inner Tubes . Suits CHRYSLER Centura KB - KC Sedan. Learn MoreExpected ship date:Next Business DayAU$52.45Set -
MDI Lower Control Arm Inner Bush : suit RV1/SV1: (ID:20.80mm / OD:30.70mm)
High quality reproduction of the factory fitted lower control arm inner bushes. Hemi Performance have meticulously reproduced this item in their exclusive MDI polyurethane. Specifically manufactured for use in RV1... Learn MoreExpected ship date:Next Business DayAU$69.00Set of 2 -
MDI Lower Control Arm Inner Bush : suit SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM : (ID:20.80mm / OD:35.00mm)
High quality reproduction of the factory fitted lower control arm inner bushes. Hemi Performance have meticulously reproduced this item in their exclusive MDI polyurethane. Suitable for use in SV1, AP5,... Learn MoreExpected ship date:Next Business DayAU$59.00Set of 2 -
MDI Lower Control Arm Inner Bush with outer sleeve : suit RV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM : (ID:20.5mm / OD:37.3.00mm)
Upgrade your Chrysler Valiant suspension with the MDI Lower Control Arm Inner Bushes, expertly crafted to fit a wide range of classic models including RV1, AP5, AP6, and VC through... Learn MoreExpected ship date:Next Business DayAU$128.00Set of 2 -
MDI Upper Control Arm Bush : suit RV1-CM Valiant
Suitable for use on all Chrysler/Valiant models (RV1, SV1, AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.) Learn MoreExpected ship date:Next Business DayAU$129.00Set of 4 -
MOOG Control Arm Bump Stop Set (2x Upper & Lower)
Suitable for use on all Chrysler/Valiant models (AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.) Made of high quality rubber. Learn MoreExpected ship date:Next Business DayAU$89.00 -
MOOG Rubber Upper Control Arm Bump Stop
Factory correct " Upper control arm bumper " As found on all Chrysler & Valiant models. This restoration components offer factory-like rubber bumper reaction whilst retaining factory-correct aesthetics. Sold individually... Learn MoreExpected ship date:Next Business DayAU$14.50Each -
MOOG Upper Control Arm Offset Bush Set : suit AP5-CM (per arm)
These high quality eccentric MOOG upper control arm bushes are suitable for use in all Chrysler Valiant models: AP5, AP6, VC, VE, VF, VG, VH, VJ, VK, CL & CM.... Learn MoreExpected ship date:Next Business DayAU$100.10Each -
NEW Steel Lower Control Arm Pin : Suit SV1/AP5/AP6/VC/VE/VF/VG/CL/CM : Zinc coated
Replace your old and worn control arm pins with these brand new perfect factory reproductions. Suitable for all models RV1-CM. Learn MoreExpected ship date:Next Business DayAU$69.00Set of 2 -
New Steel Lower Control Arm Pin Set (Includes Washers, and Nyloc Nuts)
Replace your old and worn control arm pins with these brand new perfect factory reproductions. Supplied complete with correct replacement washers and nyloc nuts. Suitable for RV1, SV1, AP5, AP6,... Learn MoreExpected ship date:Next Business DayAU$89.00 -
Reconditioned HP Upper Control Arm (Left Hand)
Suitable for use in all models (AP5-CM.) Are your control arms, bushes, and ball joints worn, perished or weathered? Let Hemi Performance supply you a reconditioned set! Learn MoreExpected ship date:1 Dec 2026(if ordered today)AU$419.00Each