Wheels & Tyres
-
"SE Wreath" Medallion Badge : Suit CL/CM Regal
High quality factory-perfect reproduction. Suitable for use on CL/CM vehicles, was factory fitted to the C-pillars, wheel covers and locking fuel cap. Learn MoreAU$28.50Each -
1/2" Chrome Mag Wheel Nut and Washer (Right Hand Thread)
This is not suitable for 7/16 studs. This nut is designed for use with 1/2 inch studs, as is found on our disc kits and in some early USA models Learn MoreAU$13.75Set of 5 -
1/2" Front Wheel Stud (right hand thread) : suit HP Heavy Duty Front Ventilated Disc Rotors
Suit all models fitted with HP heavty duty vented front disc brakes. Thread Knurl Dia. Length Shoulder 1/12 15.7mm 49.7mm 18.6mm Learn MoreAU$4.10Each -
7/16" Chrome Acorn Wheel Nut (Left Hand Thread)
Suit steel rims, will hold on the factory center cap even if the hold down lugs are broken. Thread: 7/16" L/H Hex: 21mm Total Height: 45mm Pinch at base: 60%u00C2%u00BA Learn MoreAU$22.50Set of 5 -
7/16" Chrome Acorn Wheel Nut (Right Hand Thread)
Suit factory steel rims, will hold on the factory center cap even if the hold down lugs are broken. Thread: 7/16" R/H Hex: 21mm Total Height: 35mm Pinch at base:... Learn MoreAU$11.25Set of 5 -
7/16" Chrome Mag Wheel Nut (Over Length)
To suit aftermarket alloy mag wheels . Thread: 7/16" R/H Hex: 21mm Total Height: 57mm Shank Length: 34mm Learn MoreAU$20.00Set of 5 -
7/16" Chrome Mag Wheel Nut and Washer (Right Hand Thread)
These high quality chrome wheel nuts are suitable for use on various alloy mags / rims. Check sizing below to ensure suitability for your application. Manufacturer Specifications Thread: 7/16" R/H... Learn MoreAU$13.50Set of 5 -
7/16" Front Wheel Stud & Nut(Right Hand Thread) : Suit VC/VE/VF fitted with Solid Disc Brake Rotors
Suit all models fitted with solid disc brakes. Thread Knurl Dia. Length Shoulder 7/16" R/H 14.3mm 37.3mm 16.3mm Unit supplied may differ from picture depending on what supply is available... Learn MoreAU$25.25Set of 5 -
7/16" Front Wheel Stud (right hand thread): suit Ventilated Disc Brake Rotors VG/VH/VJ/VK/CL/CM
Suits models VH/VJ/VK/CL/CM fitted with ventilated front disc brakes. Thread Knurl Dia. Length Shoulder 7/16" R/H 14.3mm 39.9mm 17.2mm Learn MoreAU$22.50Set of 5 -
7/16" Front Wheel Studs (Set of 5) (Right hand thread) : Suit Front Drum Brakes RV1/SV1/AP5/AP6/VC/VE/VF
Suits AP5/AP6/VC/VE/VF/VG fitted with front drum brakes . Thread Knurl Dia. Length Shoulder 7/16" R/H 13.9mm 36.00mm 9.9mm Learn MoreAU$22.00Set of 5 -
7/16" Mag Wheel Nut Washer ONLY
These high quality wheel nut washer are suitable for use on various alloy mags / rims. Check sizing below to ensure suitability for your application. Manufacturer Specifications ID: 17.50 mm... Learn MoreAU$9.90Set of 5 -
7/16" Rear Wheel Stud (Right Hand): suit Drum Brake/Axles RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
Suit all models fitted with rear drum brakes including RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM. Thread Knurl Dia. Length Shoulder 7/16" R/H 12.2mm 39.9mm or 41.5mm 9.8mm Importance note: factory length is approx 39.5mm overall... Learn MoreAU$34.76Set of 5 -
7/16" Reproduction Sankey Benson Wheel ** Chrome ** Wheel Nut (Right Hand Thread)
If you have genuine Sankey Benson mags and are missing or wanting to retire your worn original wheel nuts, then you can not go past these 100% factory perfect restoration items. Learn MoreAU$15.65Set of 5 -
7/16" Standard Chrome Wheel Nut (Right Hand Thread)
This wheel nut is only available in right hand thread. Thread: 7/16" R/H Hex: 19mm Total Height: 35mm Pitch at base: 60º This product is sold individually. Learn MoreAU$10.99 As low as: AU$10.00Set of 5 -
Chrome Acorn/Bulge Wheel Nut : 1/2" : Right hand thread
Suit factory steel rims, will hold on the factory centre cap even if the hold down lugs are broken. Thread: 1/2" R/H Hex: 21mm Total Height: 35mm Pinch at base:... Learn MoreAU$11.25Set of 5 -
Chrome Acron Wheel Nut : 1/2" : Left hand thread
Please note: This is not suitable for factory studs. This nut is designed for use with upgraded 1/2 inch studs, as is found on our disc kits. Suit factory steel... Learn MoreAU$19.25Set of 5 -
Chrome Mag Nut and Washer (overlength) : 1/2" : Left hand thread - Custom Made/ Special Order
This is not suitable for 7/16 studs. This nut is designed for use with 1/2 inch studs, as is found on our disc kits and in some early USA models Learn MoreAU$9.50 -
Chrome Mag Nut and Washer (overlength) : 1/2" : Right hand thread
This is not suitable for 7/16 studs. This nut is designed for use with 1/2 inch studs, as is found on our disc kits and in some early USA models Learn MoreAU$22.50Set of 5 -
Chrome Standard Wheel Nut : 1/2" : Right hand thread
Please note: This is not suitable for factory studs. This nut is designed for use with upgraded 1/2 inch studs, as is found on our disc kits. This wheel nut... Learn MoreAU$11.25Set of 5 -
CURRENTLY UNAVAILABLE - 7/16" Chrome Mag Wheel Nut and Washer (Left Hand Thread)
Suitable for various alloy mag wheels. Thread: 7/16" L/H Hex: 21mm Total Height: 40.50mm Shank Length: 19mm Learn MoreAU$14.75Set of 5Out of stock
-
Long Front Wheel Stud 7/16" (Right hand thread) : Suit Front Drum Brakes RV1/SV1/AP5/AP6/VC/VE/VF
Suits AP5/AP6/VC/VE/VF/VG fitted with front drum brakes . Thread Knurl Dia. Length Shoulder 7/16" R/H 13.9mm 73.00mm 8.5mm Learn MoreAU$8.50Set of 5 -
Long Rear Axle Wheel Stud : 7/16'' Right Hand : Suit Chrysler Valiant RV1/SV1/AP5/AP6/VC/VE/VF/VG/VH/VJ/VK/CL/CM
Direct replacement wheel stud to suit rear axles for all Chrysler & Valiant models. Measure 72mm from shoulder to stud end. Thread Knurl Dia. Length Shoulder 7/16" R/H 12.2mm 72.0mm... Learn MoreAU$85.00Set of 10 -
Open End Wheel Nut : Zinc : Tapered Seat : 1/2" : Right Hand Thread
Please note: This is not suitable for factory studs. This nut is designed for use with upgraded 1/2 inch studs, as is found on our disc kits. This wheel nut... Learn MoreAU$7.50Set of 5 -
Overlength 7/16" Front Wheel Stud (Right hand Thread): suit Ventilated Disc Brake Rotor VH/VJ/VK/CL/CM
Suit all models fitted with front vented disc brakes. Including VH/VJ/VK/CL/CM. Thread Knurl Dia. Length Shoulder 7/16" R/H 14.3mm 73.0mm 22.0mm Learn MoreAU$12.50Each -
Reproduction Chrome Factory W35 Mag Wheel Nut : 1/2" : Right hand thread
If you have genuine W35 mags and are missing or wanting to retire your worn original wheel nuts, then you can not go past these 100% factory perfect restoration items. Learn MoreAU$40.00Set of 5 -
Reproduction Sankey Benson Wheel Center Cap
These high quality chrome center caps are sure to sweeten the look of your ride. Sold individually in case you just need one or two. Learn MoreAU$49.00Each -
Reproduction Sankey Benson Wheel Center Cap Set
These high quality chrome center caps are sure to sweeten the look of your ride. Purchase a set today for your car! Learn MoreAU$149.00 -
Reproduction W32 Road Style Wheel Center Cap (One Only)
Do you own a W32 optioned Valiant running factory fitted the Styled Road Wheel Package? This Hemi Performance exclusive reproduction part is just what you've been looking for! Manufactured using... Learn MoreAU$50.00Each -
Reproduction W32 Road Style Wheel Center Cap Set
Do you own a W32 optioned Valiant running factory fitted the Styled Road Wheel Package? This Hemi Performance exclusive reproduction part is just what you've been looking for! Manufactured using... Learn MoreAU$139.00 -
Reproduction W35 ROH Spun Aluminium Wheel Centre Cap : suit R/T, 770
These brand new W35 ROH wheel center caps are a perfect addition to your vehicle. Factory fitted to Charger R/T and optioned 770 vehicles. Do you have a Valiant Charger... Learn MoreAU$74.99Set of 4 -
Restoration-correct W35 Wheel Nut : Five-piece Set (1/2'')
Restoration-correct w35 wheel nut : five-piece set (1/2'') Authentic restoration-correct wheel nut to suit original equipment alloy mag-wheels fitted to w35 optioned Chrysler & Valiant vehicles. Featuring correct machined markings,... Learn MoreAU$44.50Set of 5 -
Standard Replacement Zinc Wheel Nut (7/16" Left Hand Thread)
Set of 5 wheel nuts. Thread: 7/16" L/H Finish: Zinc Hex: 19mm Total Height: 14mm Pitch at base: 60%u00C2%u00BA Learn MoreAU$11.25Set of 5 -
Standard Tapered Seat Wheel Nut : 1/2'' Left-hand Thread
Standard replacement wheel nut as found on all Chrysler, Dodge & Plymouth models using 1/2'' left-hand thread wheel studs. Sold individually. Suits 1/2'' diameter thread Left-hand thread Zinc-plated Overall Length... Learn MoreAU$3.85Each -
Standard Tapered Seat Wheel Nut : 7/16'' Left-Hand Thread
standard tapered seat wheel nut : 7/16'' left-hand thread standard replacement wheel nut as found on all valiant models using 7/16'' left-hand thread wheel studs. sold individually suits 7/16'' diameter... Learn MoreAU$8.49Each -
Standard Tapered Seat Zinc Wheel Nut (7/16" Right Hand Thread)
Standard replacement tapered seat wheel nut as found on all Chrysler & Valiant models using 7/16'' right-hand thread wheel studs. Thread: 7/16" R/H Finish: Zinc Hex: 19mm Total Height: 14mm... Learn MoreAU$8.70Set of 5 -
Wheel/Tyre Valve Cap Set : HEMI
Beautiful quality black valve caps and BONUS wrench key tag! Features the HEMI insignia. Learn MoreAU$20.36Each -
Wheel/Tyre Valve Cap Set : MOPAR
Beautiful quality black valve caps and BONUS wrench key tag! Features the MOPAR insignia. Learn MoreAU$20.57Each -
Wheel/Tyre Valve Cap Set : R/T
Beautiful quality black valve caps and BONUS wrench key tag! Features the R/T insignia. Learn MoreAU$20.69Each